Ford Repair Questions? Ask a Mechanic for Answers ASAP
Hello, I am John, a Ford dealer technician.
I hope I can help solve your problem quickly and accurately.
I am going to post instructions on how to do this. You are going to need a ps pulley puller/installer which you can get on loan from autozone or advance.
Click here for directions (give me just a minute to edit, having trouble uploading)
I hope this answer has been helpful to you! If you have any further questions please feel free to ask.
If this answer has been helpful please accept so I can recieve payment. Feedback is very
important to me so please leave accurate feedback for others to see my job performance.
Sorry, the upload system must be down. Without this I can't post any pics. If you don't mind waiting a bit as soon as it is working I will post them.
Sorry, im going to opt out. I think I have a problem on my end. I'll get another expert to help out.
Thank you for asking your question on JustAnswer.
Hello new expert, are you needing PS pump removal instructions?
Enclosed are instructions for the 3.8.
DOWNLOAD HERE 3.8
Here you go as well as the belt routing when you go back togather.
The system will hold right at a quart.
No if you are just replacing the pump you will not need them. The seal will slid on if you are careful.
The core will be your old one, once you return the old pump you will get credit for this charge. The new pump runs about #138.00 but a reman may be slightly cheeper.