How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask RJ Your Own Question
RJ, Ford Technician
Category: Ford
Satisfied Customers: 1574
Experience:  Ford senior master and ase master certified 19years Ford dealership experience
Type Your Ford Question Here...
RJ is online now
A new question is answered every 9 seconds

7.3 navistar diesel have the same bellhousing bolt pattern as a 6.

Resolved Question:

does a 7.3 navistar diesel have the same bellhousing bolt pattern as a 6.0 navistar diesel engine commonly found in superduty fords
Submitted: 7 years ago.
Category: Ford
Expert:  RJ replied 7 years ago.
No they are different bolt patterns .
Customer: replied 7 years ago.
Is there any possibility a torqshift trans could be swaped in with a lttle fabrication then having to replace the stock e4od, if so how
Expert:  RJ replied 7 years ago.
No the electronics required to run the torqshift would not function without using the torque shift trans / engine control module. And you could not just install the ecm without it being hooked up to the proper engine, it would not function proper it would be in a continuous failure mode.
RJ and 5 other Ford Specialists are ready to help you