How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask SuperBob Your Own Question
SuperBob
SuperBob, Ford Senior Master, Mazda Senior
Category: Ford
Satisfied Customers: 2609
Experience:  18 years Ford, Lincoln, Mercury, Mazda Dealer ASE master, diesel certified. Specialize electrical
17143921
Type Your Ford Question Here...
SuperBob is online now
A new question is answered every 9 seconds

How to test a/c clutch solenoid fuse on ford ranger

Customer Question

how to test a/c clutch solenoid fuse on ford ranger
Submitted: 7 years ago.
Category: Ford
Expert:  SuperBob replied 7 years ago.

HelloCustomer the only true test on fuse 1.7 on the attached illustration is #1 visual, then remove the fuse and connect both terminals to the leads of an ohm meter and test for continuity. As the illustration has a misprint, it is in one of the two locations indicated in yellow. The fuse that is high lit in green can be tested with a conventional 12 volt test light. Both of these fuses are used to engage the a/c clutch. one for the relay, and one for the clutch coil.

 

graphic