How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ford snr master Your Own Question
Ford snr master
Ford snr master, ASE Certified Technician
Category: Ford
Satisfied Customers: 1809
Experience:  14 years at same Ford dealer,senior master and ASE master certified,hybrid certified,SYNC certified,10 year master's tenure
21020025
Type Your Ford Question Here...
Ford snr master is online now
A new question is answered every 9 seconds

1998 ford f150: wheel drive..fuses or relays i..control module

Resolved Question:

1998 ford f150 wont shift in or out ofXXXXX no problems with fuses or relays i was told that geheric control module could be cause
Submitted: 7 years ago.
Category: Ford
Expert:  Ford snr master replied 7 years ago.
yes it could be the GEM (generic control module) that failed but first before replacing use a hammer and rap/tap on the transfercase shift motor a few times and see if it operates then,if so it is the shift motor
Customer: replied 7 years ago.
i alreadt replaced motor it looked like it was siezed up but now i have no power even to the motor and no 4 wheel lights even come on in dash
Expert:  Ford snr master replied 7 years ago.
if the 4x4 lights dont come on during self test when you turn the key on then you might have blown fuse #17 ,30Amp fuse, or check fuse #23, 10Amp in the underhood fusebox, if those are good ,then yes it could be the module
Ford snr master and 6 other Ford Specialists are ready to help you