How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask lostrider Your Own Question
lostrider
lostrider, Ford Technician
Category: Ford
Satisfied Customers: 3075
Experience:  ASE Master Technician, Ford Senior Master Technician,Diesel certified, ASE Master, 22 yrs FORD exp.
9493671
Type Your Ford Question Here...
lostrider is online now
A new question is answered every 9 seconds

ford explorer spark plug wires diagram

Customer Question

ford explorer spark plug wires diagram
Submitted: 7 years ago.
Category: Ford
Expert:  lostrider replied 7 years ago.
HiCustomer Thank you for asking your question on JustAnswer. The other Experts and I are working on your answer. By the way, it would help us to know:

-What year is your Ford?
-What type of engine is in your Ford?


Thank you again for trusting us with your problem. Please reply as soon as possible so that we can finish answering your question.
Customer: replied 7 years ago.
i just replace my spark plugs and wires i think i hook some of them up wrong i need a diagram to see where they all go i have a 1999 2wd 4.0 ford explorer when i turn it on it makes funny rumbling sound
Expert:  lostrider replied 7 years ago.

Thank you for the reply, here is a diagram of the firing order and the cylinder location on the engine, and a diagram of the coil with the cylinder # XXXXX the plug wire, hope this helps.

graphicgraphic

 

 

 

 

 

Click ACCEPT for the Answer and please leave a FEEDBACK!!!, Thank you.

Customer: replied 7 years ago.
i looked at the diagram and connected everything and engine still rumbles and it get worst when ac is on i know for a fact i got wire 1 2 3 right do you have to use a certain wire for each plug?
Expert:  lostrider replied 7 years ago.
No, just as long as they reach the spark plug, was it running like this before you did the work on the truck?