How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask EMRSR Your Own Question
EMRSR
EMRSR, Master Certified Service Manager
Category: Ford
Satisfied Customers: 3010
Experience:  20 years with Ford, Master Certified
18136160
Type Your Ford Question Here...
EMRSR is online now
A new question is answered every 9 seconds

Where is the crankshaft sensor on a 2000 ford ranger

Customer Question

where is the crankshaft sensor on a 2000 ford ranger
Submitted: 8 years ago.
Category: Ford
Expert:  EMRSR replied 8 years ago.
What engine?
Customer: replied 8 years ago.
2000 ford ranger 4 cyd rwd and the crank shaft sensor needs to be replaced can you tell me where it is?
Expert:  EMRSR replied 8 years ago.

Yes see C102.

 

Locations
Crankshaft Position Sensor
Notes

Service and Repair
Notes

REMOVAL

  1. Disconnect the battery ground cable.
  2. Raise and support the vehicle.

  1. Disconnect the Crankshaft Position (CKP) sensor electrical connector.

  1. Remove the bolts and the CKP sensor.

INSTALLATION

  1. To install, reverse the removal procedure
Expert:  EMRSR replied 8 years ago.
See it?