How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daryl Your Own Question
Daryl
Daryl, Shop Owner, Master Mechanic
Category: Ford
Satisfied Customers: 12547
Experience:  28 years experience, Master Mechanic
8994801
Type Your Ford Question Here...
Daryl is online now
A new question is answered every 9 seconds

Put a new Serpentine belt on my 2005 ford five hundred limited.

This answer was rated:

How do I put a new Serpentine belt on my 2005 ford five hundred limited.

Below is a diagram, you loosen it at the TEN this is a auto tensioner so you just pull it one way to loosen it and then install the new belt and release the tensioner.

 

graphic

Customer: replied 7 years ago.
Do I have to remove any thing to do this?
No you do not, below is a little better pic, It looks like you use a square drive to loosen the tensioner, square drive would be a 1/2 or 3/8 end of ratchet. graphic
Daryl and other Ford Specialists are ready to help you