How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tim Your Own Question
Tim
Tim, Ford Technician
Category: Ford
Satisfied Customers: 3580
Experience:  Ford Senior Master tech, ASE certified
9591582
Type Your Ford Question Here...
Tim is online now
A new question is answered every 9 seconds

HOW DO I REMOVE THE WIPER MOTOR ON MY F150 1988 FORD

This answer was rated:

HOW DO I REMOVE THE WIPER MOTOR ON MY F150 1988 FORD

Wiper Motor

F-150-250-350, F-Super Duty Chassis Cab and Bronco

Removal

NOTE: The wiper motor is not serviceable. It must be replaced as a complete assembly.

  1. Disconnect the battery ground cable.
  1. Remove both wiper arm and blade assemblies and disconnect the antenna cable.
  1. Remove the cowl grille attaching screws and remove the cowl grille.
  1. Disconnect the washer nozzle hose and remove the cowl grille assembly.
  1. Remove the wiper linkage clip from the motor output arm.
  1. Disconnect the wiper motor wiring connector.
  1. Remove the wiper motor's three attaching screws and remove the motor.


Wiper Motor, F-150-250-350, F-Super Duty Chassis Cab and Bronco


graphic

Installation

  1. Install the motor and attach the three attaching screws. Tighten to 6.8-9.6 Nm (60-85 in-lb).
  1. Connect wiper motor wiring connector.
  1. Install wiper linkage clip to the motor output arm.
  1. Connect the washer nozzle hose and install the cowl assembly and attaching screws.
  1. Install both wiper arm assemblies as outlined. Install cowl grille.
  1. Connect battery ground cable.
Tim and 5 other Ford Specialists are ready to help you

Is this what you were looking for?

Related Ford Questions