How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka- Moose) Your Own Question
Chris (aka- Moose)
Chris (aka- Moose), Technician
Category: Ford
Satisfied Customers: 46009
Experience:  16 years experience
2499435
Type Your Ford Question Here...
Chris (aka- Moose) is online now
A new question is answered every 9 seconds

i put new clutch in my f150 4x4 1989 now no clutch how to bleed hidro

Customer Question

i put new clutch in my f150 4x4 1989 now no clutch how to bleed hidro
Submitted: 8 years ago.
Category: Ford
Expert:  Chris (aka- Moose) replied 8 years ago.

Hello Stanley, I'm Chris, a current Ford Lincoln Mercury employee.

 

Thanks for visiting Just Answer. I will do my very best to help you resolve your concerns.

 

Did you also replace the slave cylinder or master cylinder in your task of installing a new clutch?

 

 

Customer: replied 8 years ago.
no ,thought thay were working ok before .i did take out slave and put new thro out
Expert:  Chris (aka- Moose) replied 8 years ago.

OK here is how to bleed the hydralic clutch system.

graphic

Customer: replied 8 years ago.
i allready tried ; push to floor open bleeder,close pull peddle up ,again ,again........ no ped. very little air ,no ped.
Expert:  Chris (aka- Moose) replied 8 years ago.
Since your not getting any air when doing the bleed procedure then you most likely have installed incorrect clutch parts or the the slave cylinder is faulty.
Expert:  Chris (aka- Moose) replied 8 years ago.

Have not heard back from you, so I assume you are needing more assistance on this matter, if so please do reply so I can finish this question. My goal is to have nothing but satisfied customers

Thanks Hope to hear from you soon, Chris