How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tim Your Own Question
Tim
Tim, Ford Technician
Category: Ford
Satisfied Customers: 3580
Experience:  Ford Senior Master tech, ASE certified
9591582
Type Your Ford Question Here...
Tim is online now
A new question is answered every 9 seconds

Ford f 150 clutch bleeding procedures

This answer was rated:

ford f 150 clutch bleeding procedures
What year F150?
Customer: replied 8 years ago.

ho do you bleed the master and slave cylinder on f 150

 

I need to know what year f150 you have?

Customer: replied 8 years ago.
the ford is a1987 f 150 4x4 regular cab the clutch does not slip but i cant get into any gear unless i shut the engine off so I was thinking that the master cylinder fro the clutch was finished or the slave cylinder
Is the fluid resivoir empty?
Customer: replied 8 years ago.
no its full to the top
To bleed a hydralic clutch pump the pedal 10 times fast and hold pressure on the pedal while some one loosens the bled screw on the slave cylinder. Repeat two or three times and you should have a good pedal. From the sounds of the concern it sounds like you will be needing a new slave cylinder.DO NOT let the resivoir run dry or you will get a air pocket.
Tim and other Ford Specialists are ready to help you