How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Carhelp4u Your Own Question
Carhelp4u
Carhelp4u, ASE CERTIFIED TECH
Category: Ford
Satisfied Customers: 5203
Experience:  ASE CERTIFICATION
3903212
Type Your Ford Question Here...
Carhelp4u is online now
A new question is answered every 9 seconds

1991 fordf250: theignitionswitchlockcyclinder..tilt..steeringcolumn

Resolved Question:

how to replace turn signal switch on 1991 ford f250

took the ignition switch lock cyclinder out ,tilt wheel handle shank removed ,removed lower steering column shroud, can't figure out how to get upper shroud off covering signal switch?

Submitted: 8 years ago.
Category: Ford
Expert:  Carhelp4u replied 8 years ago.

This will require removal of the steering wheel for starters. You will need a puller to get the wheel off. Here is how this procedure is completed.

graphic

graphic

Carhelp4u and 2 other Ford Specialists are ready to help you