How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ray M. Your Own Question
Ray M.
Ray M., Ford Master Tech
Category: Ford
Satisfied Customers: 3018
Experience:  30+ years in trade, Ford Master Tech, Journeyman Automotive Tech
11409661
Type Your Ford Question Here...
Ray M. is online now
A new question is answered every 9 seconds

1986 Ford F150: What controls fuel injector pulse..ignition module

This answer was rated:

I have a 1986 Ford F150, 5.0 EFI. What controls fuel injector pulse. We have replaced fuel pump, ignition module and the computer. It won't start. There is no signal to injectors. What do I need to try or do next?
The PCM or powertrain control module controls the injector pulse width,you need to check the wire and connectors for pushed out pins or broken wires.
Ray M. and 7 other Ford Specialists are ready to help you
Customer: replied 7 years ago.

Where is it located?

 

It is located under the dash near the center.
Ray M. and 7 other Ford Specialists are ready to help you

Related Ford Questions