How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 33019
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

How do I remove the starter out of me Ford f350

Resolved Question:

How do I remove the starter out of me Ford f350?
Submitted: 7 years ago.
Category: Ford
Expert:  Ron replied 7 years ago.
HiCustomer Thank you for asking your question on JustAnswer. The other Experts and I are working on your answer. By the way, it would help us to know:
-What year is your Ford?
-What model is your Ford?
-How many miles are on your Ford?
-What type of engine is in your Ford?
-What have you already tried?

Thank you again for trusting us with your problem. Please reply as soon as possible so that we can finish answering your question.
Customer: replied 7 years ago.

Year: 1991

model: f350


engine: 460


Just needing to know if there is a best angle to get it out because of the reverse bolt

Customer: replied 7 years ago.
Best angle of approach to remove the top bolt
Expert:  Ron replied 7 years ago.

NO once you have all the bolts out it drops right out. There are 3 bolts.


  1. Disconnect battery ground cable.
  2. Raise and support vehicle, if necessary.
  3. Disconnect starter cable from starter motor.
  4. Remove starter motor attaching bolts and the starter motor.
  5. Reverse procedure to install.
Customer: replied 7 years ago.
Any tips on how best to reach the top bolt?
Expert:  Ron replied 7 years ago.
Yes, take a 6inch extension and a 13m wobbly socket and it pretty easy to get to.
Ron and 2 other Ford Specialists are ready to help you
Customer: replied 7 years ago.
Thanks so much for your response. Is there a certain angle that is better than another to get at this? Not trying to be a pain, just really frustrated.