How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask AlvinC Your Own Question
AlvinC
AlvinC, Ford Technician
Category: Ford
Satisfied Customers: 1241
Experience:  With Ford 20+years as Dealership Technician Ford Senior Master Technician Gas and Diesel
10384837
Type Your Ford Question Here...
AlvinC is online now
A new question is answered every 9 seconds

1994 F250: NON TURBO 7.3L..OR PURGE FUEL SYSTEM AFTER INSTALL

Customer Question

1994 F250 NON TURBO 7.3L, HOW DO YOU BLEED OR PURGE FUEL SYSTEM AFTER INSTALL OF REMAN INJECTION PUMP
Submitted: 8 years ago.
Category: Ford
Expert:  AlvinC replied 8 years ago.
Customer Hold the scrader valve on the fuel filter housing while cranking until you get steady fuel, This will fill the filter. Then crack 2 injectors loose at the injectors and back the nut off a turn or so, crank the engine until you see fuel pulsing from those injectors. Tighten them back up. Crack open 2 different injectors and crank the engine, the engine should try and start at this point, if it does tighten the injectors. If it stalls move on to 2 different injectors and do the same. It normally will start after the first 2. I hope this helps, if not let me know, Al

Related Ford Questions