How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Steve Your Own Question
Steve
Steve, Sr. Tech
Category: Ford
Satisfied Customers: 718
Experience:  20 years as a FORD dealership tech
5096800
Type Your Ford Question Here...
Steve is online now
A new question is answered every 9 seconds

I have a Ford 460 D1VE 6015-A2B and I am trying to find the

Customer Question

I have a Ford 460 D1VE 6015-A2B and I am trying to find the correct hardware to mount it to my engine stand. I am having difficulty determining the thread on the bolt holes where the transmission mounts. Can you tell me what the thread is??
Submitted: 8 years ago.
Category: Ford
Expert:  Steve replied 8 years ago.
..HELLO!
Have you tried the trans bolts? They should be long enough. For 1981 you are in the metric zone.
Steve
Customer: replied 8 years ago.
I don't have the trans bolts, I want to know what the thread is so I can purchase from the hardware store. What is the thread??
Expert:  Steve replied 8 years ago.
..HELLO!
I was wrong! The 460 still used SAE threads in 1981. My book says that the trans bolts are 7/16-14 x 1 3/4in. Sorry about that.
Steve
Steve and other Ford Specialists are ready to help you
Customer: replied 8 years ago.
That is exactly what I needed! Thanks!
Expert:  Steve replied 8 years ago.
..HELLO!
You are welcome!
Steve

Related Ford Questions