How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Lurch Your Own Question
Lurch
Lurch, Ford Cert.
Category: Ford
Satisfied Customers: 20799
Experience:  Ford Cert., Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years
1609972
Type Your Ford Question Here...
Lurch is online now
A new question is answered every 9 seconds

2000 Ford Contour: the timing marks..DOHC..camshaft..crankshaft

Customer Question

I need to know the timing marks for a 2000 Ford Contour 2.0 DOHC camshaft and crankshaft?
Submitted: 8 years ago.
Category: Ford
Expert:  Lurch replied 8 years ago.

You will need alignment tools

Here is FORD procedure, which shows mark locations & details (.pdf):

click below
TIMING MARKS

 

Customer: replied 8 years ago.
Reply to Lurch's Post: Does the timing tools tell you what the marking should be?
Expert:  Lurch replied 8 years ago.
The tools will index the Cam & Crankshaft to the position they need to be, but knowledge of how the components need to be lined up is very important.
If you have never done this type install before, you need to have someone familar with the Timing Belt help you complete the installation, or damage can occur.
This is not a easy job.
Most Auto Parts Stores should have the tools needed also
Expert:  Lurch replied 8 years ago.
This was instructions out of Manual & took a little time to upload them

Related Ford Questions