How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask lostrider Your Own Question
lostrider
lostrider, Ford Technician
Category: Ford
Satisfied Customers: 3075
Experience:  ASE Master Technician, Ford Senior Master Technician,Diesel certified, ASE Master, 22 yrs FORD exp.
9493671
Type Your Ford Question Here...
lostrider is online now
A new question is answered every 9 seconds

where is the knock sensor located on 98 zx2

Customer Question

No Comment Added
Submitted: 8 years ago.
Category: Ford
Expert:  lostrider replied 8 years ago.
here is the replace
SECTION 303-14: Electronic Engine Controls1998 Escort/Tracer Workshop Manual
REMOVAL AND INSTALLATIONProcedure revision date: 03/05/1998

Knock Sensor (KS)-2.0L SPI

Removal and Installation

NOTE: The knock sensor (KS) is located on the RH side of the cylinder block.

  1. Disconnect the battery ground cable. For additional information, refer toSection 414-01.
  1. Raise the vehicle on a hoist. For additional information, refer to Section 100-02.
  1. Disconnect the KS electrical connector.
  1. Remove bolt and the KS.
  1. To install, reverse the removal procedure.


ment procedure with graphicgraphicpictures, hope this helps.

Related Ford Questions