How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Shawn Your Own Question
Shawn, Auto Service Technician
Category: Ford
Satisfied Customers: 3756
Experience:  16 years experience Ford,Nissan and Honda dealership in all areas
Type Your Ford Question Here...
Shawn is online now
A new question is answered every 9 seconds

Where is the transmission control module on a 1993 Ford Taurus 3.8

This answer was rated:

No Comment Added
HiCustomer Thank you for asking your question on Just Answer. The other Experts and I are working on your answer. By the way, it would help us to know:

-What year is your Ford?
-What model is your Ford?
-Do you mean the PCM?
-What have you already tried?

Thank you again for trusting us with your problem. Please reply as soon as possible so that we can finish answering your question.
Customer: replied 8 years ago.
1993 Ford Taurus Station wagon GL
3.8L engine and I want to replace the transmission module because everytime I press the brakes the transmission disingages and does not go into gear when pushing the gas pedal after stopped comletly


You may have a bad torque converter. From what you have described sounds like the converter is going bad. The vehicle has a PCM (powertrain control module) but no TCM.graphic

Shawn and 3 other Ford Specialists are ready to help you
Customer: replied 8 years ago.
Thank you very much
Your welcome