How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Randall (Cheeko) Your Own Question
Randall    (Cheeko)
Randall (Cheeko), Certified Mechanic Ford Motor Co.
Category: Ford
Satisfied Customers: 2395
Experience:  18 years as a Ford tech and still going
3075798
Type Your Ford Question Here...
Randall (Cheeko) is online now
A new question is answered every 9 seconds

How to remove door trim panel on a 2004 crown vic

Customer Question

No Comment Added
Submitted: 9 years ago.
Category: Ford
Expert:  Randall (Cheeko) replied 9 years ago.

Hi, below is the information, thanks

graphic

graphic

graphic

graphic

Randall (Cheeko) and other Ford Specialists are ready to help you
Customer: replied 8 years ago.
You gave me an answer on "how to remove door trim panal on a 04 crown vic. It states "remove the door handle cup sctew, then remove interior door handle and cup! how do I get the door handle and cup off?
Expert:  Randall (Cheeko) replied 8 years ago.

Hi, take a small blade flat head screwdriver and tape the end to protect the plastic trim and then pry the handle / cup out,thanks

 

graphic

Customer: replied 8 years ago.
Thanks. I'll give it a try
Customer: replied 8 years ago.
The thing that that diagram fails to mention is the 5/32 head screw that in on the inside of the panel that is accessible after removing the window switch assembly
Expert:  Randall (Cheeko) replied 8 years ago.
Hi, the 3rd diagram has the information , the arrow shows the location, thanks