How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jerry Your Own Question
Jerry
Jerry, Auto Mechanic
Category: Ford
Satisfied Customers: 2948
Experience:  Mechanic with over 30 years experience with N.Y.P.D. fleet service division
1699649
Type Your Ford Question Here...
Jerry is online now
A new question is answered every 9 seconds

1991 FORD EXPLORER: WHERE R DIAGRAMS FOR VACUUM LINES..4.0L

Customer Question

WHERE R DIAGRAMS FOR VACUUM LINES ON A 1991 FORD EXPLORER WITH A 4.0L ENGINE
Submitted: 8 years ago.
Category: Ford
Expert:  Jerry replied 8 years ago.

HelloCustomerthere are 2 posible engine vacuum routing diagrams for your Explorer. I am sending both and a abreviation definition chart. I hope this helps you out,good luck,Jerry

graphicgraphicgraphicgraphic

Customer: replied 8 years ago.
Jerry

I appreciate the response, but, from what i have seen those will not work. More specifically it has to do with the lines running into the intake manifold, through the very large air intake part.