How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask HDGENE Your Own Question
HDGENE, Ford Senior Master/Diesel/Trans
Category: Ford
Satisfied Customers: 4782
Experience:  25 years Auto experience, Ford ,GM, Chrysler, Asian & European
Type Your Ford Question Here...
HDGENE is online now
A new question is answered every 9 seconds

The 4x4 button, i get no indicator..already checked..fuses under

Resolved Question:

when i press the 4x4 button, i get no indicator on the dash. I have already checked the fuses under the dash and they are good. also, the abs light is lit on the dash all of the time
Submitted: 8 years ago.
Category: Ford
Expert:  HDGENE replied 8 years ago.
A diagnostic check for codes for both the abs and 4x4 system needs to be done first to make sure the abs code is not the roo cause for the 4x4 concen.Most likley this is two different problems. There have ben alot of problems/updates with the 4x4 systems on these explorers including a need to replace the 4x4 control module for uncommanded 4x4 engagement. Find out what codes are stored for both modules first.Then I can b of more specific help.
HDGENE and 3 other Ford Specialists are ready to help you