How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Thomas Your Own Question
Thomas
Thomas, Auto Service Technician
Category: Ford
Satisfied Customers: 364
Experience:  Ford engine , airconditioning, drivabillity and electrical specialist
6767279
Type Your Ford Question Here...
Thomas is online now
A new question is answered every 9 seconds

interior plastic..rear seat..pictures or diagrams..back together

Customer Question

All interior plastic is out excluding the dash. I need to remove the rear seat to install carpet. do You have pictures or diagrams to help me put interior back together, as I did not remove it. I can handle door panels I need trim and console. I will accept any portion of this with the rear seat removal Thanks, David
Submitted: 8 years ago.
Category: Ford
Expert:  Thomas replied 8 years ago.
Is this a crew cab , reg cab or extended cab. I can get you what you need but it may take a little bit.
Customer: replied 8 years ago.
This is an extended cab. The rear seat is holding up at this point does it fold down?
As I said the doors are no problem the console and trim such as headliner Thanks David
Expert:  Thomas replied 8 years ago.

If you just need to remove the seat to replace the carpet you can get away with removing the nuts and bolts holding the seat bottom to the floor and then left the seat up. Here is an exploded view.

graphic

Part NumberDescription
1 - Rear seat safety belt cover
2 - Rear seat backrest
3 W708731 Rear seat riser-to-floor outboard nut (2 required)
4 W708731 Rear seat riser-to-floor inboard nut (2 required)
5 W710680 Rear seat LH riser bolt (2 required)
6 W710661 Rear seat center riser-to-floor bolt
7 - Rear seat cushion assembly

Removal

here are some more trim views to help.

graphic

Part NumberDescription
1 1531458 Assist handle bolt cover (2 required)
2 W709246 Assist handle bolt (2 required)
3 025A82 RH/ 025A83 LH A-pillar trim panel
4 1613200 RH/ 613201 LH Front scuff plate
5 1516B999 Cover plate
6 1502348 Cowl trim cover plate
7 - B-pillar bolt cover
8 - Safety belt trim cover
9 707491 B-pillar bolt
10 N806773 Safety belt nut
11 N811323 Safety belt anchor bolt
12 1613244 RH/(NNN) NNN-NNNNLH Rear scuff plate
13 16243A52 RH/ 16243A53 LH B-pillar trim panel
14 W703242 Rear assist handle bolt
15 1631430 RH/(NNN) NNN-NNNNLH Rear assist handle
16 - Lower safety belt anchor bolt cover
17 N811323 Lower safety belt anchor bolt
18 - Safety belt bolt cover
19 W708473 Safety belt bolt
20 - C-pillar bolt cover
21 W707491 C-pillar bolt
22 16278D12 RH/ 16278D13 LH C-pillar trim panel

  1. For additional information, refer to the procedures in this section.

 

 

graphic

Part NumberDescription
1 14358 Rear electrical connector
2 - Sun visor retaining screw (6 required)
3 1504132 Sun visor retaining clip
4 1504100 RH/(NNN) NNN-NNNNLH Sun visor
5 14334 Interior mirror electrical connector
6 7852124 Roof opening panel trim (if equipped)
7 29019 Coat hook (2 required)
8 - Headliner pin-type retainer (2 retainers)
9 - Modular overhead console track screw (if equipped) (4 required)
10 1651968 Headliner

Removal and Installation

All vehicles

  1. Disconnect the battery ground cable and wait at least one minute. For additional information, refer to Section 414-01.
  1. If equipped, remove the rear entertainment system. For additional information, refer to Section 415-00.
  1. If equipped with a single overhead console, remove the overhead console. If equipped with a modular overhead console, remove the modular components. For additional information, refer to Section 501-12.
  1. Remove the A-pillar trim panel. For additional information, refer to A-Pillar Trim Panel in this section.
  1. Remove the B-pillar trim panel. For additional information, refer to B-Pillar Trim Panel - Regular Cab, B-Pillar Trim Panel - SuperCab or B-Pillar Trim Panel - SuperCrew in this section.
  1. If equipped, remove the C-pillar trim panel. For additional information, refer to C-Pillar Trim Panel in this section.
  1. Disconnect the rear electrical connector.
  1. Remove the LH and RH sun visor retaining screws.
  1. Remove the LH and RH sun visor retaining clips.
  1. Remove the sun visors.
    • If equipped, disconnect the electrical connectors.
  1. Disconnect the interior mirror electrical connector.
  1. If equipped, remove the roof opening panel trim.
  1. Remove the 2 coat hooks.
  1. If equipped, remove the 2 headliner pin-type retainers.
  1. If equipped, remove the 4 modular overhead console track screws.

graphic

  1. Position the headliner aside.
  1. Remove the rear window glass. For additional information, refer to Section 501-11.
  1. Remove the headliner.
    • Remove the headliner through the rear window glass opening

graphic

NumberDescription
1 N811040 Push pins (3 required)
2 1504609/(NNN) NNN-NNNNFloor trim panel (2 required) (LH/RH)
3 15011202 Shifter trim panel
4 7E395 Shifter cable
5 14401 Electrical connector
6 W704734-S424 Floor console bolts (4 required)
7 15011202 Floor console

Removal and Installation

  1. Remove the 3 floor trim panel push pins.
  1. Remove the 2 floor trim panels.
  1. Remove the shifter trim panel.
  1. Disconnect the shifter cable.
  1. Disconnect the floor console electrical connector.
  1. Remove the 4 floor console bolts.
    • To install, tighten to 6 Nm (53 lb-in).
  1. Remove the floor console.
  1. To install, reverse the removal procedure.

 

Thomas and 4 other Ford Specialists are ready to help you
Customer: replied 8 years ago.
Thanks
Expert:  Thomas replied 8 years ago.
no problem . If you run into anything else with this project let me know.
Customer: replied 8 years ago.
OK