How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Glenn Your Own Question
Glenn
Glenn, Senior Master Ford Tech
Category: Ford
Satisfied Customers: 1746
Experience:  26 years exp with Ford Products, ASE Master Auto & Truck + advanced engine perf L1/L2 Gas & Diesel
3389900
Type Your Ford Question Here...
Glenn is online now
A new question is answered every 9 seconds

I replace a Upper intake plenum Gasket for a 1999-2004 Ford Mustang

Resolved Question:

How do I replace a Upper Intake Plenum Gasket for a 1999-2004 Ford Mustang
Submitted: 9 years ago.
Category: Ford
Expert:  Glenn replied 9 years ago.

hello jenn,

What size engine?

Customer: replied 9 years ago.
Reply to Glenn's Post: Engine is 4.6, my dad is looking for the tork sequence and pattern for the intake plenum gasket. Only has 1 plenum, no upper and lower.
Expert:  Glenn replied 9 years ago.

Glad I asked, I was going to send the 6cyl because of the word upper.

If you need anything else just ask! Glenn

graphic

Customer: replied 9 years ago.
Reply to Glenn's Post: He needs the tork setting please and thank you. He said it would be in foot or inch lbs. He is asking if 18 foot lbs correct?
Expert:  Glenn replied 9 years ago.
Yes that is correct! Converts to about 288 IN pounds [most foot lb torque wrenches do not set that low]
Glenn and 7 other Ford Specialists are ready to help you
Customer: replied 9 years ago.
Thank You!