How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Brad Your Own Question
Brad
Brad, ASE Certified Technician
Category: Ford
Satisfied Customers: 2366
Experience:  ASE Certified Master Technician
5135651
Type Your Ford Question Here...
Brad is online now
A new question is answered every 9 seconds

How do I remove the door panel on a 1999 Ford Contour

Customer Question

I'm replacing the speakers, front and rear.
Submitted: 9 years ago.
Category: Ford
Expert:  Brad replied 9 years ago.
HelloCustomer and welcome to JustAnswer.com!

Here are the removal instrctions, along with some helpful illustrations for your door panels:

FRONT REMOVAL

All Vehicles


graphic

1. Remove the door latch release handle bezel (passenger side shown, driver side similar).

1 Remove the screw cover.
2 Remove the screw.
3 Detach the bezel.
4 Disconnect the electrical connectors.

graphic


2. Remove the interior door handle.

1 Remove the bezel.
2 Remove the screws.
3 Remove the handle.

Vehicles With Manual Windows


graphic

3. Remove the window regulator handle.

o Use a suitable piece of wire.

All Vehicles

graphic


4. Remove the side window vent trim panel.

1 Remove the screw cover.
2 Remove the screw.
3 Remove the panel.


graphic

5. Remove the door trim panel.

INSTALLATION

1. To install, reverse the removal procedure.





REAR REMOVAL

All Vehicles

graphic


1. Remove the door latch bezel.

1 Remove the screw cover.
2 Remove the screw.
3 Remove the bezel.
4 Disconnect the power window switch electrical connector (if equipped).


graphic

2. Remove the handle bezel.

1 Remove the screw.
2 Remove the bezel.

Vehicles With Manual Windows


graphic

3. Remove the window regulator handle.

o Use a suitable piece of wire.

All Vehicles

graphic


4. Remove the door trim panel.

INSTALLATION

1. To install, reverse the removal procedure.


Good luck!