How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Telles Spence Your Own Question
Telles Spence
Telles Spence, Auto Tech
Category: Ford
Satisfied Customers: 312
Experience:  ASE Cert. Ford Cert.
1127519
Type Your Ford Question Here...
Telles Spence is online now
A new question is answered every 9 seconds

2007 ford crown victoria police: i deactivate the seat belt chime

This answer was rated:

how do i deactivate the seat belt chime in the 2007 ford crown victoria police interceptor

Preparation

  1. Before deactivating/activating the safety belt minder, set the parking brake.
  1. Place the transmission range selector lever in PARK (P).
  1. Place the ignition switch in the OFF position.
  1. Close all the vehicle doors.
  1. Unbuckle the driver and the front passenger safety belts.
  1. Place the parking lamps/headlamps switch in the OFF position.

Deactivating/Activating

  1. Turn the ignition lock cylinder to the ON position (do not start the engine).
  1. Wait until the safety belt warning indicator turns off (approximately 1 minute).
  1. NOTE: Step 3 must be completed within 50 seconds after the safety belt warning indicator turns off.

    For the seating position being disabled, at a moderate speed, buckle then unbuckle the safety belt 9 times, ending with the safety belt in the unbuckled state. After this step the air bag warning indicator illuminates for 3 seconds.
  1. Within 10 seconds of the air bag warning indicator turning on, buckle then unbuckle the safety belt.
    • This disables the safety belt minder feature for that seating position, if it is currently enabled. As confirmation, the air bag warning indicator flashes 4 times per second for 3 seconds.
    • This enables the safety belt minder feature for that seating position, if it is currently disabled. As confirmation, the air bag warning indicator flashes 4 times per second for 3 seconds, followed by 3 seconds off, and then 4 times per second for 3 seconds.
  1. After confirmation, the deactivation/activation procedure is complete.

Telles Spence and 10 other Ford Specialists are ready to help you

This can be tricky so it mught take a few time to get it I hope the will help you Have a goo eveing

Telles