Lincoln Repair Questions? Ask a Mechanic for Answers ASAP
Welcome! My name is ***** ***** I will do my best to assist you with this problem.
do you have a ball joint tool to get the ball joints to come off ?
if not you can rent one or borrow one from some local autoparts stores OR with a 3 or 5 lb big hammer remove the ball joint nuts and then strike the side of the steering knuckle hard with the hammer will usually release the ball joint out of the knuckle
once they are all released the spindle should come out then you can press out the old bearing and press in the new bearing not forgetting the inner snap ring after the center hub is pressed out also
dont forget to rate us here
you can always get me back for FREE for any follow up any time with this question even after you rate me here at Justanswer
if you have any questions please ask as i do not get credit for my work until you rate me here at Justanswer
how are you making out ?