How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kenny Z. Your Own Question
Kenny Z.
Kenny Z., Lincoln Technician
Category: Lincoln
Satisfied Customers: 5235
Experience:  Lincoln Senior Master
9600325
Type Your Lincoln Question Here...
Kenny Z. is online now
A new question is answered every 9 seconds

I went to get my emissions inspection done on my navigator

Customer Question

Hi there. I went to get my emissions inspection done on my navigator and it failed because the OBD could not connect to there computer system. How can I fix this problem? Thanks
Submitted: 5 months ago.
Category: Lincoln
Expert:  Kenny Z. replied 5 months ago.

Hello, my name is***** and thanks for your question.

Using the chart at the link below, with the key on and engine off, what is the voltage between pins 16 and 4?

What is the voltage between 10 and 2?

https://www.dropbox.com/s/j4ud4451xd4vno7/dlc.pdf?dl=0

Expert:  Kenny Z. replied 5 months ago.

Hello again,

If you need further assistance please feel free to reply and we can continue. Otherwise please take a moment to rate my answer as you see fit. After rating, the thread is still available should you need further assistance. Experts are not compensated without a positive rating. Providing a rating does not close the question, you can reply or ask additional questions without incurring further charges.

Thanks,

Kenny Z

Related Lincoln Questions