How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask HDGene Your Own Question
HDGene
HDGene, ASE Certified Technician
Category: Lincoln
Satisfied Customers: 4784
Experience:  25 year ASE Master Technician & Advanced Drivability L1 Certified Ford Senior Master Technician
285738
Type Your Lincoln Question Here...
HDGene is online now
A new question is answered every 9 seconds

How to replace rear wheel brgs on 04ls. they're noisy, is

Customer Question

how to replace rear wheel brgs on 04ls. they're noisy, is bearing pressed onto the hub and spindle as well
Submitted: 1 year ago.
Category: Lincoln
Expert:  HDGene replied 1 year ago.

Yes it is pressed into the wheel knuckle so you would have to remove the wheel knuckle assembly and press the hub and bearing out of the knuckle and press the new one into the knuckle.

Customer: replied 1 year ago.
are there bearing seals or are the bearings sealed
Customer: replied 1 year ago.
are there seals or are the bearings a sealed unit
Expert:  HDGene replied 1 year ago.

The bearing is a sealed press in bearing, through ford/lincoln dealers you have to buy it as the complete wheel knuckle assembly. But it is availvable aftermarket.The hub and bearing would have to be pressed out and pressed back in. The dealer cost for each knuckle assembly is well over $400.00. Any machine shop or shop can replace the wheel bearing and hub