How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ronnie Your Own Question
Ronnie
Ronnie, ASE Certified Technician
Category: Lincoln
Satisfied Customers: 33855
Experience:  35 years as an automotive tech
7276279
Type Your Lincoln Question Here...
Ronnie is online now
A new question is answered every 9 seconds

Lincoln Town Car Designer Series: Working on wifes lincoln

Customer Question

Working on wifes lincoln T/C blend door motor, when un mounted motor will run like 270 degrees around, but the door only turns like 60 degrees between hot and cold? Is it goig to break that door everytime? doesn't make sense. Dash is out and car is all apart. Dan
Submitted: 1 year ago.
Category: Lincoln
Expert:  Ronnie replied 1 year ago.
Hello and thank you for your question,There should be no reason for the actuator to break the blend door once the actuator is installed, it's normal for it to move further then the door and once it's mounted it will turn till the door is closed in either direction and then stop. Place it on the mounting and try it back and forth and it should shut off.