Recent Feedback
Have a 09 Lincoln town car. Trying to replace the low beam lamp on drivers side. I get the 3 screws out--two on top & 1 low near center. I can't pull the assembly out. I have looked it over pretty good & I don't see any more screws. What else is holding the headlight assembly in?
Country: United StatesMake: LincolnModel: Town Car SignatureYear: 2009 Already Tried: Removed shield & 3 screws. Highlight Assembly won't pull out.
It sounds like you have all the bolts out.You need to disconnect the electrical connector (#5 in the diagram).Now grab both sides of the headlight and pull straight out and jiggle it at the same time.
What is the number 4 in the image? There seems to be something securing it there.
Thank you for using Just Answer