Greetings and welcome to just answer!!!!
You are trying to remove the rear door panel?
Do you have an answer? How to access power seat switch in front right door panel, or check for loose wire?
Yes you do have to remove the door panel. There are 2 screws behind the pull handle, you have to remove those, have you removed those.
Pull this cover in the picture and remove the 2 screws.
then what--total of (6)screws then? what picture?
ok--will total of (6) screws be removed?
I don't recall any other screws being removed. The ones you removed were they screwed into the metal frame? After you remove those 2 screws, the whole panel should lift off from there.
yes--at the (4)corners of the whole door panel--I did not see the ones behind the pull handle--removing those (2) should release the entire panel? any stick-em?
Yes that should do it. There will probably be a little stick em, but not real bad.
I'm most suspect of the switch behind the door panel, but could it be the backrest operator itself?
the backrest powers only down but not up.
Yes it could be the backrest itself, but contacts and the switch are most common.
Do you want a wiring diagram?
Ok. Thanks. Wouldn't hurt to see a diagram.
Let me know if I can help further,
ps: don't forget to hit the accept button, I do not get credit for my work until you do.
Thanks, Bob. I will.