How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Russell H. Your Own Question

Russell H.
Russell H., Service Tech
Category: Exercise Equipment
Satisfied Customers: 9535
Experience:  8+ years of professional experience
13568747
Type Your Exercise Equipment Question Here...
Russell H. is online now
A new question is answered every 9 seconds

I go into calibration mode and it has a E1 S Stall error but

Customer Question

I go into calibration mode and it has a E1 S Stall error but if I hit raise and lower it will raise and lower and move past the stall error. But after a while I will get a message "invalid incline data" It doesn't seem to know how high or low it is.
Submitted: 8 months ago.
Category: Exercise Equipment
Expert:  Russell H. replied 8 months ago.

Hi, thank you for contacting JustAnswer.com. My name is Russell. I will do my best to provide the right answer to your question.

I think that likely means that your incline position sensor may be dead, disconnected, or deactivated. Checking on that first, is advisable.

Has the machine been in storage until recently, or recently moved?