How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Pete Your Own Question

Pete
Pete, Electronic Engineer
Category: Exercise Equipment
Satisfied Customers: 15775
Experience:  Over 16 years of experience installing and repairing electronics.
30970729
Type Your Exercise Equipment Question Here...
Pete is online now
A new question is answered every 9 seconds

I have a proform 995c. When I turn on it is says no ifit

Customer Question

I have a proform 995c. When I turn on it is says no ifit module after turning on and off a few times it will work for a few minutes and stop. I recently had treadmill moved and the stop button on lower console looks damaged. I'm guessing this is sticking. Is there any way to fix or just replace that part instead of entire console.
Submitted: 8 months ago.
Category: Exercise Equipment
Expert:  Pete replied 8 months ago.

Hi Bill,

Customer: replied 8 months ago.
Where's the answer??
Customer: replied 8 months ago.
Still waiting for an answer
Expert:  Pete replied 8 months ago.

Thanks for replying back to me.

If the module is not detected as connected, the display will show the words NO IFIT MODULE.

Check the connections, and replace the cable. Let me know if that works?