How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Michael Hannigan Your Own Question

Michael Hannigan
Michael Hannigan, Engineer
Category: Exercise Equipment
Satisfied Customers: 11187
Experience:  25+ Years Experience in Field. Master Certified Electronics Tech and Technical Consultant
23511658
Type Your Exercise Equipment Question Here...
Michael Hannigan is online now
A new question is answered every 9 seconds

JUST BOUGHT A CADENCE R 5.2. FOLLOWING INSTRUCTIONS ON PAGE

Customer Question

JUST BOUGHT A CADENCE R 5.2. FOLLOWING INSTRUCTIONS ON PAGE 14 RE:
INFORMATION MODE I CANNOT GET THE DISPLAY TO LIGHT. ALL ELSE O.K.
Submitted: 11 months ago.
Category: Exercise Equipment
Expert:  Michael Hannigan replied 11 months ago.

Hello. My name is Michael. I will be helping you with your question today.

Expert:  Michael Hannigan replied 11 months ago.

This procedure is only if you want to run the Treadmill in Demo mode - it is meant for when they are on store display to demonstrate the features, but rarely used otherwise. Are you sure that this is what you want to do?

To do it, you should be able to enter demo mode by pressing and holding the stop button while putting in the key. Let me know if that answers your question or if you need additional informaiton.