How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Pete Your Own Question

Pete
Pete, Electronic Engineer
Category: Exercise Equipment
Satisfied Customers: 15767
Experience:  Over 16 years of experience installing and repairing electronics.
30970729
Type Your Exercise Equipment Question Here...
Pete is online now
A new question is answered every 9 seconds

I changed the motor control on a nordictrack 2000 and ran fine a

Customer Question

Hi, I changed the motor control
on a nordictrack 2000 and ran fine a couple of times but now the motor is gone is there a reason for this, thanks
Submitted: 1 year ago.
Category: Exercise Equipment
Expert:  Pete replied 1 year ago.
Hi there,If the belt is worn or fitted too tightly, it will overwork the motor and cause damage to it.Check the condition of the belt, adjust the tension if necessary, replace if worn, and use belt lubricant regularly to keep it running smoothly and protect your motor.