How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete
Pete, Electronic Engineer
Category: Exercise Equipment
Satisfied Customers: 16555
Experience:  Over 16 years of experience installing and repairing electronics.
30970729
Type Your Exercise Equipment Question Here...
Pete is online now
A new question is answered every 9 seconds

I just assembled a weslo cadence g 5.9 treadmill and the

Customer Question

Hi , I just assembled a weslo cadence g 5.9 treadmill and the belt doesnt work. the console works and it is not on demo mode. i removed the motor cover and the board light is on
Submitted: 1 year ago.
Category: Exercise Equipment
Expert:  Pete replied 1 year ago.
Hi there,
Test the voltage going to the motor to ensure it is correct.
Try running the motor with the belt off to check that it turns ok.
If the motor turns when the belt is off, then the belt may have been put on too tight - try adjusting the belt tension and let me know if that works.