Nordic Track EXP 1000S - Keeps tripping the (dedicated 120 v line) circuit breaker. I get power to the wires going to the Power Board (PB12i), but as soon as I connect them to the power board the circuit breaker trips. So what is causing this? The PB12i power board? The Motor contoller board?
Make: Nordic Track
Model: EXP 1000 S
Confirmed the correct power to the power board. Once the power is connected to the power board, the circuit breaker trips.
The belt motor is fine, checked with a power drill battery
I am 100% positive that the motor control board is bad
you have the right symptoms, and every thing else should be good
im not sure if you lube the deck and belt every threee months or so but if your not make sure you do before installing the new controller board or this will happen again
please read the attached link below very helpful
it talks about the lube process
if there is anything else you need help with just ask or if you are satisfied with my answer please "ACCEPT" my answer and leave good feedback thanks steve
20 years Exp repairing every single make and model
Steve, I finally put the new MC board in yesterday. That was the problem!Tim Blair