How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Stevebuckley2 Your Own Question

Stevebuckley2
Stevebuckley2, Technician
Category: Exercise Equipment
Satisfied Customers: 461
Experience:  20 years Exp repairing every single make and model
64364379
Type Your Exercise Equipment Question Here...
Stevebuckley2 is online now
A new question is answered every 9 seconds

bremshey treadmill showing error code E1.What does it mean

Resolved Question:

bremshey treadmill showing error code E1.What does it mean
Submitted: 4 years ago.
Category: Exercise Equipment
Expert:  Stevebuckley2 replied 4 years ago.

Stevebuckley2 :

this is a speed sensor error ,The error will appear if the upper board cannot receive pulses from the speed sensor for 10 seconds. Possible reasons: Speed sensor not properly assembled, the distance between the magnet and the speed sensor should be less than 3mm. Speed sensor cable disconnected Meter cable has a poor connection at some point Magnet missing from the front roller pulley Front roller not rotating at all due to loose drive belt Check the distance between the speed sensor and the flywheel and ensure that the speed sensor is properly attached to the motor frame. Check also speed sensor connections. Error can be reset also by re-inserting the safety key. this should be an easy fix please accept my answer thanks Steve

Stevebuckley2 and other Exercise Equipment Specialists are ready to help you