How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask treadmilltech Your Own Question

treadmilltech, Technician
Category: Exercise Equipment
Satisfied Customers: 5645
Experience:  20+ years experience repairing exercise equipment with emphasis on Nordictrack/Proform and Horizon
Type Your Exercise Equipment Question Here...
treadmilltech is online now
A new question is answered every 9 seconds

fault code E1 is showing on my horizon quantum II treadmill

Resolved Question:

fault code E1 is showing on my horizon quantum II treadmill do you know what this means thanks.
Submitted: 5 years ago.
Category: Exercise Equipment
Expert:  treadmilltech replied 5 years ago.
You will need to check the speed sensor for proper alignment, cleanliness and function. it should be located near the front roller or mounted on the motor. It should be within a credit cards width of the magnet or toothed wheel. If properly adjusted check with an a multi-meter to see if it is opening and closing by manually spinning the front roller or motor flywheel. If it isn't replace the sensor.
treadmilltech and other Exercise Equipment Specialists are ready to help you