Hello,I own a Trotter 525 treadmill and I am having problems starting the machine. I can't input any speed and I receive an Error 1: No Speed Signal At Startup message. Is there anything I could co to rectify this please?Thank you for your help.
I can't start the machine.
The speed sensor is to blame most likely. It is either mounted to the frame close to the front roller or mounted on the motor. Make sure it is clean and adjusted within a credit cards width from the magnet or spoked wheel depending on the type. Unplug and replug it in, if you still are having problems replace the sensor.
20+ years experience repairing exercise equipment with emphasis on Nordictrack/Proform and Horizon