How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Craig Your Own Question

Craig
Craig, Technician
Category: Exercise Equipment
Satisfied Customers: 4529
Experience:  35 years troubleshooting all types of electrical equipment and appliances.
21549903
Type Your Exercise Equipment Question Here...
Craig is online now
A new question is answered every 9 seconds

I have a Nordic Track CXT 910 Elliptical Trainer. The control

Resolved Question:

I have a Nordic Track CXT 910 Elliptical Trainer. The control no longer adjust the resistance. At the readout it acts as if it is adjusting the resistance , but the small motor that actuates the cable to the resistance does not move.

Thanks
Submitted: 7 years ago.
Category: Exercise Equipment
Expert:  Craig replied 7 years ago.
Is there any voltage present going to the motor?
Customer: replied 7 years ago.
No voltage to the motor leads at all.
Expert:  Craig replied 7 years ago.
This is not a motor problem then, rather, a control board. It must be faulting when it tires to power up the motor. Change the control board for the motor.
Craig and other Exercise Equipment Specialists are ready to help you