How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask TOM Your Own Question

TOM
TOM, Gunsmith
Category: Firearms
Satisfied Customers: 4264
Experience:  17 YRS EXPERIENCE,Certified Armorer
47830436
Type Your Firearms Question Here...
TOM is online now
A new question is answered every 9 seconds

I have a Navy Arms black powder revolver, .36 cal, sn 03389.

Customer Question

I have a Navy Arms black powder revolver, .36 cal, sn 03389. it has a round barrel,and square groove in hammer for sighting,--has a broken mainspring. Also needs six nipples.
Where can i get the above?
Bob ******
Submitted: 2 months ago.
Category: Firearms
Expert:  TOM replied 2 months ago.

Hi,

The nipples should be a 12-28 thread, you can order them from Track of the Wolf. Double check the thread size with a pitch gauge. The diameter should be approximately .2160" They have blued and stainless, scroll to the bottom of the page.

https://www.trackofthewolf.com/List/Item.aspx/807/1

Numrich has the mainspring, the following link is to the order page.

http://www.gunpartscorp.com/Products/782720H.htm

Tom

Related Firearms Questions