How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask TOM Your Own Question

TOM
TOM, Gunsmith
Category: Firearms
Satisfied Customers: 4101
Experience:  17 YRS EXPERIENCE,Certified Armorer
47830436
Type Your Firearms Question Here...
TOM is online now
A new question is answered every 9 seconds

I have acquired a Iver Johnson revolver that appears to be

Customer Question

I have acquired a Iver Johnson revolver that appears to be a 32 cal. that is pretty old is there any way to get a date of manufactureing?
JA: How can the Gunsmith help you with your firearm? Please tell me everything you can so the Gunsmith can help you best.
Customer: on top of the barrel it says IverJohnson arms and cycle works,Fitchburg Mass. USA
JA: Is there anything else the Gunsmith should be aware of?
Customer: Pat. Nov 17 ?
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Gunsmith about your situation and then connect you two.
Submitted: 7 months ago.
Category: Firearms
Expert:  ProShooter replied 7 months ago.
Good afternoon. DO you know which model you have?Jim