Is there a replacement trigger for a Sako Riihimaki, Serial no 23533? Can't find a model no. on the reciever.
jewel & timney. there is a trigger for model no. L461, but can't find model on my reciever. Only has sako riihimaki serial no. 23533.
Is your gun new or an older model?
I think it is an older model. can not find model # XXXXX receiver only has sako riihimaki no23533 stamped on receiver.
I dont model no
Hi,I did some research and all of the Sako rifles have adjustable triggers. You can adjust the pull weight and over-travel. The screw in the front of the trigger is for the pull weight. Turning it clockwise will increase the pull and counter clockwise will decrease the pull weight. They should go down to 2 lbs and as high as 4.Without the exact model there is no way to find a replacement. Most are not marked in an exposed area, there may be a 75 or 85 marked somewhere on the receiver. Take the action out of the stock and look on the sides or bottom for and numbers.Riihimaki is the town in Finland where they are made. I hope this helps you,Tom
12 YRS EXPERIENCE, LAW ENFORCEMENT ARMORER