How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask TOM Your Own Question

TOM
TOM, Gunsmith
Category: Firearms
Satisfied Customers: 4274
Experience:  17 YRS EXPERIENCE,Certified Armorer
47830436
Type Your Firearms Question Here...
TOM is online now
A new question is answered every 9 seconds
Firearms

cleaning instructions for a colt mustang 380

Submitted: 5 years ago.
Category: Firearms
Ask Your Own Firearms Question
replied 5 years ago.

Hi,

Use a good quality bore cleaner for the breech face and barrel, and a cleaner/lubricant to clean the rest of the gun. I use Breakfree CLP to clean and lubricate. Remove the slide and then the recoil springs, guide rod and barrel from the slide, there is no other disassembly needed. The following manual has disassembly and cleaning instructions for your gun. Always remove the magazine and make sure the chamber is empty before starting.

http://stevespages.com/pdf/colt_mkiv_series_80_380_auto_pistols.pdf

Cleaning and disassembly starts on page 34.

I hope this helps you,

Tom

Related Firearms Questions