How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask TOM Your Own Question

TOM
TOM, Gunsmith
Category: Firearms
Satisfied Customers: 4266
Experience:  17 YRS EXPERIENCE,Certified Armorer
47830436
Type Your Firearms Question Here...
TOM is online now
A new question is answered every 9 seconds

looking for bolt parts for a Trail Blazer 22 Long Rifle

Customer Question

looking for bolt parts for a Trail Blazer 22 Long Rifle
Submitted: 6 years ago.
Category: Firearms
Expert:  TOM replied 6 years ago.

Hi,

Is this a Stevens Trail Blazer and what parts do you need?

Tom

Customer: replied 6 years ago.
thats all the info that is on the barrel- TRAIL BLAZER 22SHORT, LONG, LONG RIFLE
Customer: replied 6 years ago.
THE HOUSING WHERE THE BOLT SLIDES IN LOOKS THE SAME , BOLT SLIGHTLY DIFFERANT
Expert:  TOM replied 6 years ago.

Is it a single shot, mag fed, tube fed?

Tom

Customer: replied 6 years ago.
SINGLE SHOT
Expert:  TOM replied 6 years ago.

Hi,

Go to Numrich Gun Parts and on the Savage/Stevens/Springfield page under rifles look at the schematics for models 15, 120, 125, and 63 and see if any of them match up with your gun. This is a link to the page.

http://www.gunpartscorp.com/catalog/Models.aspx?catid=5154

They also show a Premier Trail Blazer, but it is magazine fed.

You may need to take the receiver and barrel out of the stock and look for other markings to further identify the rifle.

Tom

Customer: replied 6 years ago.

Can I Send You Photos of the bolt assembly? If so I need an e-mail address

Expert:  TOM replied 6 years ago.

Hi,

It looks like a Mossberg bolt to me. Is the safety lever on the top of the stock, by the rear of the bolt, swings side to side. Red and green dot for safe and fire?

Tom

Expert:  TOM replied 6 years ago.

Hi,

I just went through a 1200 page catalog trying to match up your bolt. The closest thing I can find is the Savage model 15 because of the cocking handle. Send the pictures to Numrich Gun Parts customer service and ask them to try to match it up. You can call them at(NNN) NNN-NNNNand they will tell you where to send them. Also send to Havlin Sales & Service and ask them to do the same. http://www.havlinsales.com/

Sorry that I couldn't be of more help, but without a brand or model # XXXXX is pretty hard to do, especially when the gun is not on my bench.

Tom