How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete
Pete, Electronic Engineer
Category: Consumer Electronics
Satisfied Customers: 16555
Experience:  Over 16 years of experience installing and repairing electronics.
30970729
Type Your Consumer Electronics Question Here...
Pete is online now
A new question is answered every 9 seconds

I purchased a programming cable from RT Systems for a Yeasu

Customer Question

I purchased a programming cable from RT Systems for a Yeasu FT-60 Hand Held radio.
I loaded their program on my computer and followed their instructions however it will not program the FT-60. I called the RT Company and they sent a replacement cable it failed also.
I am using Windows XP
Submitted: 4 months ago.
Category: Consumer Electronics
Expert:  Pete replied 4 months ago.

Hi, I'm Pete. Welcome to JustAnswer! I'm reviewing your question now, and will post back with your reply ASAP.

Expert:  Pete replied 4 months ago.

What version of programming software are you using?

What error message are you getting?

Have you tried programming a different transceiver?

Customer: replied 4 months ago.
I am using the program CD that came with the Programming USB Cable Version 5.
I do not get an error message. The last step is after I see Clone on the Radio Display is "press the "fw" button on the Radio" I do that but nothing happens. I cannot use the USB Cable on any Radio except the one I ordered it for the Yeasu FT-60

Related Consumer Electronics Questions