How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete
Pete, Electronic Engineer
Category: Consumer Electronics
Satisfied Customers: 16685
Experience:  Over 16 years of experience installing and repairing electronics.
30970729
Type Your Consumer Electronics Question Here...
Pete is online now
A new question is answered every 9 seconds

My 10x42 is wp binos "bounce" when the gyro is on and I use

Customer Question

My 10x42 is wp binos "bounce" when the gyro is on and I use the focusing knob. Like something wrong with the gyro
Submitted: 7 months ago.
Category: Consumer Electronics
Expert:  Pete replied 7 months ago.

Hi, I'm Pete. Welcome to JustAnswer! I'm reviewing your question now, and will post back with your reply ASAP.

Expert:  Pete replied 7 months ago.

Approximately how old are your 10x42 IS WP binos?

If they are still under warranty then you can return them to Canon to get the gyro fixed:

https://www.usa.canon.com/internet/portal/us/home/support/service-repair

--------------------
Your satisfaction is my priority;
Kindly take a moment to rate my service 5 stars at the top of your question page so I am rewarded for my time; tips appreciated :)
You can always reply back at any time if you need any further assistance at all.
Pete.
--------------------

Related Consumer Electronics Questions