How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete, Electronic Engineer
Category: Consumer Electronics
Satisfied Customers: 16878
Experience:  Over 16 years of experience installing and repairing electronics.
Type Your Consumer Electronics Question Here...
Pete is online now
A new question is answered every 9 seconds

I have an M&S System MC602 system. The unit is approximately

Customer Question

I have an M&S System MC602 system. The unit is approximately 17 years old. The main box seems to make noises from time to time. I took the front panel off and see the reset buttons. (4 dots). How do you suggest I activate them. Press one at a time, hold for a specified period, press all at once, use a metal device to press, etc.? THanks for any advice you can give.
Submitted: 8 months ago.
Category: Consumer Electronics
Expert:  Pete replied 8 months ago.

Hi, I'm Pete. Welcome to JustAnswer! I'm reviewing your question now, and will post back with your reply ASAP.

Expert:  Pete replied 8 months ago.

To perform a reset on the MC602, touch the four silver solder dots next to the word RESET -

the display should blink 12:00 when the reset has been successfully completed.


Kindly rate my service highly so I am credited for my time :)