How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Louie Your Own Question

Louie, Technician
Category: Consumer Electronics
Satisfied Customers: 11242
Experience:  25+ yrs. experience in the field and 5+ yrs. online, down to component level.
Type Your Consumer Electronics Question Here...
Louie is online now
A new question is answered every 9 seconds

My weigh tronix WI-125 appears as if there is no power

Customer Question

My weigh tronix WI-125 appears as if there is no power coming into it. Screen is not lighting up. Plugs we have tried are hot. was working fine yesterday. we use it 1 - 10 times per day.
JA: How long has this been going on?
Customer: just noticed it this afternoon when we went to weigh something
JA: What troubleshooting have you tried?
Customer: Not much really. Not sure what to look for all cords seem to be in good condition
JA: The electronics expert can solve this for you. Anything else you want him to know before I connect you two?
Customer: No thank you
Submitted: 2 months ago.
Category: Consumer Electronics
Expert:  Louie replied 2 months ago.

Hi and welcome to JustAnswer,

Thank you for the question and your patience. Should you still need assistance for information purposes only...

Initially, it would appear to be completely/electrically dead. If comfortably able and feel safe to do so and would attempt an internal DIY (do-it-yourself) repair approach, then proposed preliminary tries (if have not been done):

  • • check/replace fuse F1 of the power supply board;
  • • measure resistance of the primary winding of transformer T1.

Related Consumer Electronics Questions